|
|
 |
|
|
|
Program Kit 004
(SKU: PRGRM-S0001-00004)
Basic Price (per unit): $1.85 (All prices in U.S. Dollars)
Minimum Order Quantity: 30
|
|
Additional product views:
|
|
|
|
|
 |
What you get in this kit (before customizations) |
 |
- Ribbon: 5/8 inch in your choice of color
- Printable Paper: 8 ½ x 11 cardstock (2 pieces)
- Folder: 5 ½ (height) x 5 ½ (width) inches
- Square Backing: 2 ¾ (height) x 2 ¾ (width) inches
-Rhinestone
|
Available Customization Options |
|
Folder Paper, Backing Paper, Printable Paper, Ribbon Color
|
Instructions on this Product |
|
1) Use your favorite computer program to lay out your printed content on the 8 ½ x 11" pages, according to the following sizes:
- Cover square layout: 2 ½ (height) x 2 ½ (width) inches
- Inside panels: 5 (height) x 5 (width) inches
(Refer to the sample print template provided in your package for an example.) Remember that sample layouts, wording, and monogram designs are available in the Bride's Guides section of our site.
2) Print and cut the printed parts of your invitations on the 8 ½ x 11 "Printable Paper" sheets provided in the kit.
3) Cut lengths of ribbon from the 5/8 inch roll of ribbon about 11 inches in length. These strips will be used for the ribbon seen on the front of the program. Note that the ribbon has a shiny side and a dull side -- the shiny side should face outward!
4) Take the ribbon and wrap it vertically around the inside of the folder so that the ends meet up in the center of the front of the program folder. Make sure the ribbon is centered horizontally on the cover and using a hot glue gun, glue the ends of the ribbons towards the middle of the folder.
5) Take the cover square you have printed and glue it to the square backing provided in the kit so it is centered horizontally and vertically.
6) Put a small dab of glue on the spot where you would like to place the rhinestone on the front printed square and drop the rhinestone in the dab of glue and press in place until glue is dry. Make sure to work quickly as the hot glue tends to dry quite quickly.
6) Glue this piece to the cover of the program folder so it is centered vertically and horizontally, covering the ends of the ribbons.
7) Take the two printed inside panels and glue on the inside of the folder, centering each panel vertically and horizontally on the left and right side.
|
|
|
