|
|
 |
|
|
|
Nomi
(SKU: INVKT-S0002-NOMIX-00001)
Basic Price (per unit): $4.75 (All prices in U.S. Dollars)
Minimum Order Quantity: 30
|
|
Additional product views:
|
|
|
|
|
 |
What you get in this kit (before customizations) |
 |
- Pocketfolder as shown with pre-assembled inside panel (horizontal ribbon layout) - available in your choice of paper and ribbon colors
- Ribbon: 5/8 inch and 3/8 width in your choice of color
- Printable Paper: 8 ½ x 11 cardstock (2 pieces)
- Front Square backing: 2 ¾ (height) x 2 ¾ (width) inches
- Response card backing: 3 ½ (height) x 4 ½ (width) inches
-Directions card backing: 4 ½ (height) x 4 ½ (width) inches
- Japanese Band: 2 (height) x 12 (width) inches
- Envelope for response card
- Envelope for invitation (unlined)
|
Available Customization Options |
|
Folder Size, Folder Paper, Backing Paper, Printable Paper, Ribbon Color (5/8 inch), Ribbon Color (3/8 inch), Pattern, Envelope
|
Instructions on this Product |
|
1) Use your favorite computer program to lay out your printed content on two 8 ½ x 11" pages, according to the following sizes:
- Monogram square for cover: 2 ½ (height) x 2 ½ (width) inches
- Invitation main layout: 4 ¾ x 4 ¾ inches
- Response card: 3 ¼ (height) x 4 ¼ (width) inches
-Directions card: 4 ¼ (height) x 4 ¼ (width) inches
(Refer to the sample print template provided in your package for an example.) Remember that sample layouts, wording, and monogram designs are available in the Bride's Guides section of our site.
2) Print and cut the printed parts of your invitations on the 8 ½ x 11 "Printable Paper" sheets provided in the kit.
3) Take the Main Layout you have printed and on the inside of the pocketfolder, glue this piece on the assembled panel with horizontal ribbon stripe leaving a 1/8 border all around.
4) Glue the Response card you have printed to the Response Card Backing provided and insert in pocket of pocketfolder.
5) Glue the Directions cards you have printed to the Directions Card Backing provided and insert in pocket of pocketfolder.
6) Close the invitation. Take the Japanese paper/band provided in the kit and wrap it horizontally around closed invitation so it is centered vertically and the ends meet about an inch from the right side of the invitation. Glue one end of the band to the other so the band is tight around the invitation.
7) Cut a length of ribbon from the 5/8 inch roll of ribbon about 12 inches in length. These strips will be used for the ribbon stripe seen on the cover of the front of the invitation on top of the Japanese paper.
8) Using a hot glue gun, glue the ends of the ribbon on top of the Japanese band about ½ an inch from the bottom of the band so that the ends meet up about an inch from the right side of the invitation. Note that the ribbon has a shiny side and a dull side -- the shiny side should face outward!
9) Cut another length of ribbon from the 3/8 inch roll of ribbon about 12 inches in length. These strips will be used for the ribbon stripe seen on the cover of the front of the invitation on top of the Japanese paper on top of the 5/8 inch ribbon.
10) Using a hot glue gun, glue the ends of this ribbon on top of the Japanese band above the 5/8 inch ribbon already glued slightly overlapping it, so that the ends meet up about an inch from the right side of the invitation.
8) Glue the front printed square on the Front Square Backing provided.
9) Glue this piece about ½ an inch from the right side of the invitation so that is covers the ends of the Japanese band and ribbons.
|
|
|
