|
|
 |
|
|
|
Natori
(SKU: INVKT-S0002-NATOR-00001)
Basic Price (per unit): $4.35 (All prices in U.S. Dollars)
Minimum Order Quantity: 30
|
|
Additional product views:
|
|
|
|
|
 |
What you get in this kit (before customizations) |
 |
- Pocketfolder as shown with pre-assembled inside panel (vertical ribbon stripe) - available in your choice of paper and ribbon colors
- Ribbon: 5/8 inch width in your choice of color and 3/8 inch width in your choice of color
- Printable Paper: 8 ½ x 11 cardstock (2 pieces)
- Front Square backing: 2 ¾ (height) x 2 ¾ (width) inches
- Response card backing: 3 ½ (height) x 4 ½ (width) inches
- Japanese Band: 1 ½ (height) x 12 (width) inches
- Envelope for response card
- Envelope for invitation (unlined)
|
Available Customization Options |
|
Folder Size, Folder Paper, Backing Paper, Printable Paper, Ribbon Color (5/8 inch), Ribbon Color (3/8 inch), Pattern, Envelope
|
Instructions on this Product |
|
1) Use your favorite computer program to lay out your printed content on two 8 ½ x 11" pages, according to the following sizes:
- Monogram square for cover: 2 ½ (height) x 2 ½ (width) inches
- Invitation main layout: 4 ¾ x 4 ¾ inches
- Response card: 3 ¼ (height) x 4 ¼ (width) inches
(Refer to the sample print template provided in your package for an example.) Remember that sample layouts, wording, and monogram designs are available in the Bride's Guides section of our site.
2) Print and cut the printed parts of your invitations on the 8 ½ x 11 "Printable Paper" sheets provided in the kit.
3) Take the Main Layout you have printed and on the inside of the pocketfolder on the main panel glue it on top of the panel with vertical ribbon stripe. Make sure it is centered vertically and horizontally, leaving a 1/8 inch border of the back panel and ribbon stripe.
4) Take the Japanese paper/band provided in the kit and wrap vertically around the front flap of the invitation, making sure it is centered on the front flap horizontally. Glue one end of the band to the other so the band is tight around the closed invitation with the ends of the band overlapping at the centre of the front flap of the invitation.
6) Cut lengths of ribbon from the 5/8 inch roll of ribbon about 12 inches in length. These strips will be used for the ribbon stripe seen on the cover of the front of the invitation on top of the Japanese paper.
7) Using a hot glue gun, glue each end of the ribbon so it is centered on top of the Japanese band so they meet in the centre of the invitation. Note that the ribbon has a shiny side and a dull side -- the shiny side should face outward!
7) Cut lengths of ribbon from the 3/8 inch roll of ribbon about 12 inches in length. These strips will be used for the ribbon stripe seen on the cover of the front of the invitation on top of 5/8 ribbon stripe.
7) Using a hot glue gun, glue each end of the ribbon so it is centered on top of the 5/8 inch ribbon just glued so they meet in the centre of the invitation.
8) Glue the front printed square on the Front Square Backing provided.
9) Glue this piece so it is centered vertically and horizontally on the front flap of the invitation.
10) Glue printed response card on to response card backing provided and insert in pocket.
|
|
|
