|
|
 |
|
|
|
Empire
(SKU: INVKT-S0001-EMPIR-17936)
The bold styling of this horizontal invitation is sure to make a statement with your wedding guests! It features a wide ribbon and overhanging monogram design, as well as a pre-assembled four-corner ribbon inside panel.
Basic Price (per unit): $3.95 (All prices in U.S. Dollars)
Minimum Order Quantity: 30
|
|
Additional product views:
|
|
|
|
|
 |
What you get in this kit (before customizations) |
 |
- Pocketfolder as shown with pre-assembled inside panel (four-corner ribbon layout) - available in your choice of paper and ribbon colors
- Ribbon: 5/8 inch width in your choice of color
- Printable Paper: 8 ½ x 11 cardstock (2 pieces)
- Front Square backing: 3 ¼ (height) x 3 ¼ (width) inches
- Response card backing: 3 ½ (height) x 4 ½ (width) inches
- Directions card backing: 4 ½ (height) x 4 ½ (width) inches
- Envelope for response card
- Envelope for invitation (unlined)
|
Available Customization Options |
|
Folder Size, Folder Paper, Backing Paper, Printable Paper, Inside Panel, Ribbon Color, Envelope
|
Instructions on this Product |
|
1) Use your favorite computer program to lay out your printed content on two 8 ½ x 11" pages, according to the following sizes:
- Monogram square for cover: 3 (height) x 3 (width) inches
- Invitation main layout: 4 ¾ x 4 ¾ inches
- Response card: 3 ¼ (height) x 4 ¼ (width) inches
- Direction card: 4 ¼ (height) x 4 ¼ (width) inches
(Refer to the sample print template provided in your package for an example.) Remember that sample layouts, wording, and monogram designs are available in the Bride's Guides section of our site.
2) Print and cut the printed parts of your invitations on the 8 ½ x 11 "Printable Paper" sheets provided in the kit.
3) Cut lengths of ribbon from the 5/8 inch roll of ribbon about 11 inches in length. These strips will be used for the ribbon stripe seen on the cover of the front flap of the invitation.
4) Using a hot glue gun, glue each end of the ribbon (so the ribbon is running vertically around the top flap of the cover of the invitation) so that they meet at the middle of the top flap centered vertically and about 5/8 of an inch from the right side of the front flap of the invtiation. Note that the ribbon has a shiny side and a dull side -- the shiny side should face outward!
5) Glue the front printed square on the Front Square Backing provided.
6) Glue this piece centered vertically but not horizontally on the top flap of the invitation so it hangs off the front flap of the invitation by about 5/8 of an inch.
7) Take the Main Layout you have printed and on the inside of the pocketfolder on the main panel slip this inside the corner ribbons covering the blank panel underneath.
8) Glue the Response card you have printed to the Response Card Backing provided.
9) Glue the Directions card you have printed to the Directions Card Backing provided.
|
Print Templates |
|
|
|
|
